# Question: How Much Horsepower Does A 350 Bored 30 Over Have?

## Can you get 500hp out of a 350?

You “can” get 500HP out of a 350 BUT because it is a small cubic inch engine it IS going to be peaky and won’t have much torque.

You do NOT want a “chain saw” of an engine in your car.

Chain saws make NO torque and they only way they can cut wood is at wide open throttle at their peak RPM..

## How much horsepower will a cam add?

Other cams can add as much as 50 HP or more, but the more power you get from a cam, the higher up the powerband the power usually starts. If you have a 224/224 cam (instead of my 205/212), you may have to wait until 2500 or 3000 RPM to get power, but it will be more.

## What is a Chevy 350 bored 30 over?

When a block has been bored . 030 over it usually means it’s been rebuilt once, but not always. It also adds cubic inches to the displacement, a 350 bored . 030 over is 355 CI.

## What CI is a 350 bored .60 over?

Re: What is total displacement of 350 bored .060 over 4.06 x 3.14 = 12.758 x 3.48 = 44.364 x 8 = 354.915 or 355 cid.

## What size is a Chevy 350 bored 30 over?

030″ bored 350 is actually 355 cubic inches.

## What is a 350 bored 60 over with a 400 crank?

60 over with a 400 crank is around a 388.

## How much HP does a cam add to a 350?

Replacing the 2G with a Q-Jet and intake alone can be worth 25-30 hp. Toss in a mild cam and cylinder head upgrade and the power gains really start to add up.

## What can a 350 be bored out to?

Stretching a 350 to 383 inches has been a common practice for the best part of 20 years. The question here is, can we go more? In terms of bore diameter, there is not much room to go more than 30 over, although a sonic tester can find blocks good for as much as 60 over.

## How can I get more horsepower out of my 350?

No matter what application your Chevy 350 motor is in, a few simple steps can get you more better performance and higher horsepower.Modify your air intake. … Modify your exhaust. … Change your camshafts and valve train. … Purchase new cylinder heads, or have yours ported and polished. … Have your motor rebuilt and blueprinted.

## What cubic inch is a 350 bored 40 over?

7854 x number of cylinders = CI. 350 . 040″ over is a 356.88 or 357.

## How much power can a 383 stroker make?

That combo would probably make around 465 hp and nearly 500 lb-ft, but at less rpm. But never mind that. The point here is 502 lb-ft at 4,700 rpm and 500-plus horsepower from 5,700-6,200 rpm….Hot Rod’s Proven Recipe For A Simple Chevy 383 That Knocks Down 500 HP And 500 LB-FT.True 383 PowerRPMLB-FTHP6,20042550222 more rows•Oct 13, 2009

## How much do you bore a 350 to make a 383?

A 350 is a 4 inch bore, a 383 has a 4.030 bore. A 345 has a 3.48 stroke and a 383 has a 3.75 stroke crank. A 350 standard bore with a 3.75 stroke crank ia 377 cubic inches. So boring to 4.030 makes the extra 6 cubes. .060 over will make 388 cubes.